What is Trenchless Sewer Installation
Trenchless sewer installation is a process that replaces the old sewer pipes and put the new one in place of that by busting out the old pines. Without effecting or damaging the house, lawn or the street under which the effected are.
Water and gas supply and the drainage of the waist materials are the important part of our everyday life. There influence on our industrial and domestic properties cannot be denied. As the sewer lines, water pipe lines and gas lines are placed in underground and they are unseen. Most of the time people don’t pay attention on them until any problem occurs.
Underground drainage and water supply’s starter almost a century ago so most of them are not capable of taking burden of our growing needs. Further most the materials used in the making of sewer pipes were unsustainable for a century. Most of these pipes are damaged now and causing blockage. Worst is the crack of sewer line, mixes the waist material’s with the underground water and pollute them. Underground water considered to be a pure source of drinking water and once they get pollute. We have to spend huge money on filtering them.
Thus the replacement of the old sewer and water pipe become necessary. But the major obstacle on replacing underground pipe lines are the street and the houses we build on them. Until the trenchless sewer system introduced, people have to dugout the street and their homes to replace the sewer lines.
Types of Trenchless Sewer Method:
There are manly two types of method used on the process of trenchless sewer repair, Hydraulic and Dynamic. In both the process a hammer used to burst the old pipe it.
Tools used for Trenchless Sewer Replacement:
Tools used on trenchless sewer replacement are Hydraulic hammer, Winching rood or winching cable, Pipe joiner to joint PVC pipes, Pipe cutter, Threading machine to make threads specially for steel pipes and Pipe wrench.
Process of Trenchless Sewer Replacement:
A highly skilled plumber required to carry out trenchless sewer replacement process. The process starts with collecting all the tools and the equipment required in the process. First the plumber has to dugout an opening through which he can put the winching road or the winching cable to the damage old pipe. Note the dugout have to done at both the end. After that the plumber have to insert the winching cable or the road in to old pipe line and have to pass it through the entire pipe line to the other opening. This winching line is used to pull the burst hammer and the pipe to the other end.
While one plumber insert the cable in the old pipe the other plumber joint the pipe with the hammer. Note the hammer and the pipe joint have to be perfect. After jointing the hammer the cable need to connect with the hammer to pull it. Once all the connection done, the cable need to connect with a hydraulic machine which pulls the road or the cable to the other end of the sewer system.
While doing the process it needs to remember that the pipe joints have to be perfect otherwise it brake because of the friction. The process had done in dozens of properties of Kent washing ton. For know the experience you can contact few of the property owner or managers one of them in All Services PM.